Skylark L4-144 2.4L DOHC VIN T SFI (1997)
5. Lines from evaporator, discarding O-rings.
6. Lower vehicle.
7. Right side under dash insulator panel.
8. Electrical junction box at heater core cover
9. Left side insulator panel.
10. Steering column filler.
11. Partially remove shift console, if equipped, to gain access to floor duct and heater core cover.
12. Floor duct.
13. Heater core cover.
NOTICE: The heater core will be suspended by the heater core pipes. Do not apply any downward pressure on the core, or damage may occur to the
heater core pipes.
14. Heater core shroud and straps.
15. Evaporator assembly.
Install or Connect
1. Evaporator assembly.
2. Heater core shroud and straps.
3. Heater core cover.
4. Floor duct.
5. Steering column filler.
6. Left side insulation panel.
7. Electrical junction box to heater core cover.
8. Right side insulation panel.
9. Console.
10. Raise vehicle.
11. Evaporator lines.
12. Drain tube.
13. Lower vehicle.
14. Negative battery cable.
15. Evacuate and recharge A/C system.
Image Key
1 ACTUATOR
2 SHAFT, MODE VALVE
3 VALVE, MODE
4 BOLT
5 DUCT, DEFROSTER
6 SEAL, DEFROSTER VALVE
7 SEAT, DEFROSTER VALVE
8 VALVE, HEATER
9 SHROUD, HEATER CORE
10 CORE, HEATER
11 STRAP, HEATER CORE
12 COVER, HEATER CORE
13 SEAL, TUBE MOUNTING
14 SEAL, HEATER CORE
15 SPACER, EVAPORATOR MOUNTING