Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Brake Light Switch: Service and Repair
REMOVE OR DISCONNECT
1. Driver side sound insulator.
2. Electrical connection.
3. Stop lamp switch from retainer by grasping and pulling toward rear of vehicle.
INSTALL OR CONNECT
1. Insert stop light switch into retainer until switch body seats on retainer.
2. Pull brake pedal upward against internal pedal stop. Switch will be moved in retainer providing proper adjustment. Proper switch adjustment is
achieved when no clicks are heard when the pedal is pulled upward and the brake lights do not stay on without brake application.
3. Electrical connection.
4. Driver side sound insulator.
