Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Intake Air Temperature Sensor: Service and Repair
Intake Air Temperature Sensor Installation
REMOVE OR DISCONNECT
CAUTION: The Intake Air Temperature (IAT) sensor is installed in the air induction flex tube. Care must be taken when handling a IAT sensor
to avoid damage.
1. Turn the ignition switch OFF.
2. Disconnect the IAT sensor electrical connector.
3. Carefully remove the IAT sensor from air cleaner outlet duct.
INSTALL OR CONNECT
1. Install the IAT sensor into air cleaner outlet duct.
2. Connect the IAT sensor electrical connector.