Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Air Bag Control Module: Service and Repair
Repair of Mounting Studs and/or Bracket
IMPORTANT
The following repair procedures should only be used in the event that the inflatable restraint Sensing and Diagnostic Module (SDM) mounting fasteners
are damaged to the extent that the inflatable restraint Sensing and Diagnostic Module (SDM) can no longer be properly mounted.
FIRST REPAIR
1. Remove and discard the fastener.
2. Drill and tap weld-nut for use with 7.00 x 1.00 mm bolt.
3. Replace fasteners with 7 mm bolts (P/N 25601790).
Use hand tools only to achieve fastener torque. This will prevent stripping of the replacement fastener.
