Skylark L4-144 2.4L DOHC VIN T SFI (1997)
INSTALLATION
Install or connect the following:
1. Flow control spring (12).
2. Control valve assembly (13).
3. Lubricate new O-ring (15) with power steering fluid.
^
O-ring (15) on fitting (16).
4. Fitting (16) and O-ring seal (15) or Variable Assist Steering actuator (22), if so equipped.
^
If pump is equipped with a Variable Assist Steering actuator, install actuator (22) and discharge fitting (17).
^
Tighten fitting (16) to 75 Nm (55 lb. ft).
5. Pump assembly to vehicle, if removed.