Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Power Steering Pump: Service and Repair
Seal Without Disassembly Of Pump
^
Tool Required:
-
J 7728 Shaft Oil Seal Installer
-
Or Equivalent
REMOVAL
Remove or disconnect the following:
1. Pump assembly from vehicle, if necessary for access.
2. Protect drive shaft (7) with shim stock.
3. Seal (11) and discard. (Use small chisel to cut drive shaft seal.)
INSTALLATION
Install or connect the following:
Seal Installation
1. New drive shaft seal (11), lubricated with power steering fluid, using tool J 7728.
2. Pump assembly to vehicle, if removed.
