Skylark L4-144 2.4L DOHC VIN T SFI (1997)
The purpose of this procedure is to pinpoint the location of the leak. In some cases, the leak can easily be located. But, seepage-type leaks may be
more difficult to isolate. To locate seepage leaks, use the following method:
1. With the engine off, wipe dry the complete power steering system.
2. Check the fluid level in the pump's reservoir. Adjust fluid level as necessary.
3. Start the engine, then turn the steering wheel from stop to stop several times. Do not hold it at a stop for any length of time, as this can damage the
power steering pump. It is easier if someone else operates the steering wheel while you search for the seepage.
4. Find the exact area of the leak and repair leak.