Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Fluid Filter - A/T: Service and Repair
REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Drain oil.
3. Oil pan attaching bolts, oil pan and gasket.
4. Oil filter, using long screwdriver to pry filter neck out of seal.
5. Seal using tools J 6215-1B and J 23129.
Important: Check oil filter seal for damage or wear.
INSTALL OR CONNECT
1. New oil filter and/or seal.
2. Oil pan gasket; may be reused, unless sealing ribs are damaged. If damaged, use new gasket.
3. Oil pan and attaching bolts.
Tighten
^
Pan bolts to 14 Nm (124 inch lbs.).
4. Lower vehicle.
5. Fill transaxle to proper level with DEXRON(R) III oil.
Inspect
^
Oil pan gasket for leaks.
