Skylark L4-151 2.5L VIN R TBI (1982)
Wheel Hub: Service and Repair
REAR HUB/BEARING
1.
Raise and support rear of vehicle, then remove wheel and tire assembly and brake drum. Do not hammer on brake drum since damage to
bearing may result.
2.
Remove four hub and bearing assembly to rear axle attaching bolts, then the hub and bearing assembly from axle.
3.
Reverse procedure to install. Torque hub and bearing assembly to rear axle attaching bolts to 45 ft.lbs. Use care not to drop hub and bearing
assembly since damage to bearing may result.
