Skylark V6-173 2.8L VIN W FI (1985)
Brake Master Cylinder: Service and Repair
Master Cylinder Removal
CAUTION: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, drip pans and fender covers to prevent brake fluid
from contacting these areas.
-
Remove pushrod from brake pedal (manual master cylinder).
Failure Warning Switch
-
Remove electrical connector at warning switch.
Removing/Installing Master Cylinder Assembly
-
Remove tube nuts and hydraulic lines. Plug open pipes to prevent fluid loss and contamination.
-
Remove the two master cylinder attaching nuts.
-
Remove master cylinder.
For additional informations see Notes, Warnings, and Hints. See: Fundamentals and Basics