Skylark V6-173 2.8L VIN W FI (1985)
Oil Pan: Service and Repair
V6-173
1.
Disconnect battery ground cable.
2.
Raise and support vehicle.
3.
Drain engine oil from crankcase.
4.
Remove flywheel housing shield or clutch housing cover as applicable.
5.
Remove starter motor.
6.
Attach suitable lifting equipment to engine. Remove engine mount bracket-to-engine attaching bolts and raise engine slightly.
7.
Remove oil pan attaching bolts and the oil pan.
8.
Reverse procedure to install. Apply a 1/8 inch bead of RTV sealer to oil pan sealing flange.