Skylark V6-173 2.8L VIN X 2-bbl (1984)
Brake Hose/Line: Service and Repair
I.S.O. Flare
Fig. 29 I.S.O. flare
1.
Obtain correct size I.S.O. fittings and tubing, which is determined by outside diameter of tubing being replaced.
2.
Cut tubing to desired length, leaving approximately 1-8 inch on either end to allow for flare.
3.
Position fittings on tube before starting flare.
4.
Using tool No. J-28629, make flare using instructions included with kit, Fig. 29.
