Skylark V6-173 2.8L VIN X 2-bbl (1984)
FIGURE 7 - CASE COVER - VALVE BODY SIDE
X
11. Check the case cover sleeve converter feed
oil hole for being out of alignment with the oil channel in the case cover (Figure 7).
X
12. Check the converter end play, using tool
J-29830. The end play specification is .5 mm (.020"). Converters with end play more than .5 mm (.20")
must be replaced.
X
13. The turbine shaft sleeve may be leaking
excessively. If all of the above items are OK, replace this shaft.
CHART 1
U.S. MODELS
MODEL
SERIAL NO.
CA
2226
CB
156657
CE
67281
CF
5938
CT
4574
PD
2080
MODEL
SERIAL NO.
PE
50353
PE
22983
PF
47268
PG
6007
PJ
67271
