Skylark V6-3100 3.1L VIN M SFI (1996)
-
Customer induced cuts (knife cuts, cut by customer tools, etc.)
-
Paint stains (customer should have cleaned paint stains while paint was still wet)
-
Coffee stains and other removable dirt
These should be cleaned as described in the Owner's Manual under Appearance Care. Also, refer to Corporate Bulletin Number 06-00-89-029A or
later.
-
Evidence of chemicals used for cleaning, other than those specified in the Owner's Manual
-
Other chemical spills
-
Minor and normal leather wrinkles as a result of use
-
Other defects to the seat cover not detected during the pre-delivery inspection (PDI).
Inform the customer that the above issues were not present when the vehicle was purchased and cannot be replaced under warranty. The
covers, however, may be repaired or replaced at the customer's expense.
The following conditions are not caused by the customer and should be covered by warranty:
-
Split seams
