Skylark V6-3100 3.1L VIN M SFI (1996)
Brake Rotor/Disc: Technical Service Bulletins
Brake Noise
Important:
SOME BRAKE NOISE IS NORMAL.
Brake noise is caused by a "slip stick" type vibration of brake components. Some intermittent brake noise may be normal. Performing 3-4 aggressive
stops may temporarily reduce or eliminate most brake squeal. If the noise persists, a brake dampening compound may be applied to the back of each pad.
Use Permatex Disc Brake Quiet # 126HB or equivalent. Also, clean and lube all metal-to-metal contact areas between pads, pad guides, caliper and
knuckles with a thin layer of high temperature silicone grease. This allows parts to slide freely and not vibrate when moving relative to each other.
