Skylark V6-3100 3.1L VIN M SFI (1996)
Brake Shoe: Testing and Inspection
INSPECTION
Inspect brake linings for excessive wear, damage, oil, grease or brake fluid contamination. If any of the above conditions exists, brake linings should
be replaced. Do not attempt to replace only one set of brake shoes; they should be replaced as an axle set only to maintain equal braking forces.
Examine brake shoe webbing, hold-down and return springs for signs of overheating indicated by a slight blue color. If any component exhibits
overheating signs, replace hold-down and return springs with new ones. Overheated springs lose their pull and could cause brake linings to wear out
prematurely. Inspect all springs for sags, bends and external damage and replace as necessary.
Inspect hold-down retainers and pins for bends, rust and corrosion. If any of the above is found, replace as required.
