Skylark V6-3100 3.1L VIN M SFI (1996)
Brake Master Cylinder: Service and Repair
ABS Hydraulic Modulator Solenoid Assembly (with ABS)
Hydraulic Modulator Solenoid Assembly
1. Disconnect solenoid electrical connector, Fig. 69.
2. Remove solenoid assembly retaining bolt, then the solenoid from the modulator.
3. Reverse procedure to install. Torque retaining bolt to 39 inch lbs. and bleed ABS brake control assembly as described under Brake System Bleed
. See: Brake Bleeding
