Skylark V6-3100 3.1L VIN M SFI (1996)
17. Remove the oil pan retaining bolts.
18. Remove the oil pan.
19. Remove the oil pan gasket.
20. Clean the oil pan and the engine block gasket surface.
INSTALLATION PROCEDURE
^
Tools Required
-
J28467-A Engine Support Fixture
-
J28467-90 Engine Support Fixture Adapter
-
J36462 Engine Support Adapter Leg
-
J39505 Torque Wrench Adapter
1. Apply a small amount of sealer GM P/N 1234579 or equivalent on either side of the rear main bearing cap, where the seal surface on the cap meets
the cylinder block (1). Press sealant into the gap with putty knife.
2. Install the oil pan gasket.
