Skylark V6-3100 3.1L VIN M SFI (1996)
10. Remove the secondary ignition wires from the spark plugs.
Remove the secondary ignition wires from the harness at the plenum.
11. Next, remove the following components at the same time:
^
Electronic ignition coil and module assembly
^
EVAP canister purge solenoid
12. Remove the following upper engine wiring connectors:
^
Throttle Position (TP) sensor
^
IAC sensor
^
Injector harness
^
Engine Coolant Temperature (ECT) sensor
^
MAP sensor
^
Camshaft Position (CMP) sensor
13. Remove the following vacuum lines:
^
Vacuum Modulator
^
Fuel Pressure Regulator
^
PCV
14. Remove the MAP sensor from the upper intake manifold.