Skylark V6-3100 3.1L VIN M SFI (1996)
^
Throttle Position (TP) sensor
^
IAC
^
Injector harness
^
Engine Coolant Temperature (ECT) sensor
^
MAP sensor
^
Camshaft Position (CMP) sensor
6. Install the following components:
^
EVAP canister purge solenoid
^
Electronic ignition coil and module assembly
7. Install the generator.
8. Install the power steering line at the generator bracket.
9. Install the drive belt.
10. Install the secondary ignition wires to the spark plugs.
11. Install the secondary ignition wires to the harness at the plenum.
12. Install the EGR pipe to the exhaust manifold.