Skylark V6-3100 3.1L VIN M SFI (1996)
Intake Manifold: Service and Repair
Lower Intake Manifold Replacement
Removal Procedure
Tools Required
J 28467-360 Engine Support Fixture
1. Disconnect the negative battery cable.
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF
before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in
contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its
components.
2. Depressurize the fuel system.
3. Remove the top half of the air cleaner assembly.
4. Drain and recover the cooling system.
5. Remove the EGR pipe from the exhaust manifold.
6. Remove the drive belt.
7. Remove the brake vacuum pipe at the plenum.
8. Remove the power steering lines at the generator bracket.
9. Remove the generator.
