Skylark V6-3100 3.1L VIN M SFI (1996)
16. Install the upper intake manifold.
17. Install the upper intake manifold bolts.
Tighten
Tighten the bolts to 25 Nm (18 lb ft).
18. Install the MAP sensor.
19. Connect the following vacuum lines:
^
Vacuum Modulator
^
Fuel Pressure Regulator
^
PCV
20. Install the following upper engine wiring connectors:
^
Throttle Position (TP) sensor
^
IAC
^
Injector harness
^
Engine Coolant Temperature (ECT) sensor
^
MAP sensor
^
Camshaft Position (CMP) sensor
21. Install the following components:
^
EVAP canister purge solenoid
^
Electronic ignition coil and module assembly
22. Install the generator.
23. Install the power steering line at the generator bracket.
24. Install the drive belt.