Skylark V6-3100 3.1L VIN M SFI (1996)
Intake Manifold: Technical Service Bulletins
Intake Manifold (Lower) - Revised Installation
File In Section: 06 - Engine/Propulsion System
Bulletin No.: 02-06-01-014
Date: April, 2002
SERVICE MANUAL UPDATE
Subject:
Revised Lower Intake Manifold Installation
Models:
1996 Buick Regal
1996-1998 Buick Skylark
1996-2002 Buick Century
2002 Buick Rendezvous
1996 Chevrolet Beretta, Corsica, Lumina APV
1996-2001 Chevrolet Lumina
1997-2002 Chevrolet Malibu, Monte Carlo, Venture
2000-2002 Chevrolet Impala
1996-1998 Oldsmobile Achieva
1997-1998 Oldsmobile Cutlass
1996-2002 Oldsmobile Silhouette
1999-2002 Oldsmobile Alero
1996-1998 Pontiac TransSport
1996-2002 Pontiac Grand Am, Grand Prix
1999-2002 Pontiac Montana
2001-2002 Pontiac Aztek
with 3.1L or 3.4L Engine (VINs J, M, E - RPOs LG8, L82, LA1)
This bulletin is being issued to revise Steps 1 and 2 of the Lower Intake Manifold Installation procedure in the Engine Mechanical sub-section of the
Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this
bulletin on the affected page.
Intake Manifold Installation - Lower
Important:
All gasket mating surfaces need to be free of oil and foreign material. Use GM P/N 12346139 (in Canada, use GM P/N 10953463) or the equivalent
to clean surfaces.
1.
Install the intake manifold gaskets.