Skylark V6-3100 3.1L VIN M SFI (1996)
3.
The chart identifies specific instructions for each vehicle. This chart will identify the proper deodorizing procedure, template and wiring diagram.
Deodorizing the evaporator case can easily be done by removing the blower motor resistor and tape off opening. The nozzle can now be inserted
through a pierced hole in the tape to deodorize the evaporator case. For some of the vehicles specified below, a drilling procedure is identified in
the deodorizing instructions. This type of alternative procedure and others can be done by using the referenced templates in the chart.
4.
Complete detailed installation instructions are supplied with the blower control package.
Important:
A. 1996 ONLY (Use blower resistor location for drilling procedure)
B. 1994-1996 ONLY
Refer to appropriate Service Manual for enabling afterblow feature through on-board diagnostics.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
