Skylark V6-3100 3.1L VIN M SFI (1996)
Brake Bleeding: Service and Repair
ABS Bleeding Notes
Note: If any brake component is repaired or replaced such that air is allowed to enter the brake system, the entire bleeding procedure MUST be
followed.
Note: Prior to bleeding the brakes, the front and rear displacement cylinder pistons must be returned to the topmost position ("home") position).
The preferred method uses a Tech 1 to perform the rehoming procedure. If a Tech 1 is not available, the second procedure may be used, but it is
extremely important that the procedure be followed exactly as outlined.