buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Crankshaft Position Sensor > < Splicing Copper Wire Using Crimp and Seal Splice Sleeves|Page 6302
Page 1
background image

Cranking Signal: Technical Service Bulletins
Cranklow Circuit - Manual Revision

File In Section: 8 - Chassis/Body Electrical 

Bulletin No: 53-81-26

Date: September, 1995

SERVICE MANUAL UPDATE

Subject:
Sections 8A, 8C1, 9D - Revised Label/Description of Cranklow Circuit (CKT 1350)

Models:
1996 Buick Skylark
1996 Oldsmobile Achieva
1996 Pontiac Grand Am

This bulletin is to revise pages 8A-80-6, 8A-133-0, 801-16 and 9D-6 of the Service Manual.

The label/description of the cranklow circuit (CKT 1350) is not properly shown in the Service Manual. The cranklow circuit (CKT 1350) is between the
Instrument Panel Cluster CONN C1, TERM "07" (Buick and Oldsmobile)/TERM "C1 " (Pontiac) and the Ignition Switch CONN C1, TERM "D".
Please label this circuit as follows: .35 BLK, 1350. Please update the above listed pages accordingly.

Crankshaft Position Sensor > < Splicing Copper Wire Using Crimp and Seal Splice Sleeves|Page 6302