buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Intake Air Temperature (IAT) Sensor <--> [Intake Air Temperature Sensor] > < Splicing Copper Wire Using Crimp and Seal Splice Sleeves|Page 6067

Skylark V6-3100 3.1L VIN M SFI (1996)

Page 1
background image

Mass Air Flow (MAF) Sensor: Service and Repair

REMOVE OR DISCONNECT

1. Remove the MAF sensor electrical connector.
2. Remove the air inlet duct from the MAF sensor.
3. Remove the MAF sensor from the air filter housing.

INSTALL OR CONNECT

1. Carefully install the MAF sensor to the air inlet grommet.
2. Install the MAF sensor to the air inlet duct.
3. Reconnect the electrical connector.

Intake Air Temperature (IAT) Sensor <--> [Intake Air Temperature Sensor] > < Splicing Copper Wire Using Crimp and Seal Splice Sleeves|Page 6067