Skylark V6-3100 3.1L VIN M SFI (1996)
Fillpipe Restrictor: Testing and Inspection
Tool For Checking Fillpipe Restrictor
The fillpipe restrictor opening must be large enough to to accept any unleaded gas pump nozzle, but small enough to prevent use of leaded gasoline
pump nozzles.
Special tools are available to check the size of the fillpipe restrictor, or a simple tool can be made to the dimensions shown in the illustration. Suggested
material is non-sparking 1552 alloy.
1.
Attempt to insert small end of dowel into fillpipe restrictor. If the small end does not enter the restrictor, the fillpipe restrictor passes the functional
test.
