Skylark V6-3100 3.1L VIN M SFI (1996)
Fuel Injector: Testing and Inspection
Most GM manufacturers now use a voltage drop and/or a fuel pressure drop test to measure Fuel Injector Coil Integrity.
These test sequences can be found in Computers and Control Systems, under A, C or System Diagnostic Charts. See: Computers and Control
Systems/Testing and Inspection
Within these tests you might find an "Ohm" reading of the Injector, but generally this measurement is No Longer Used to solely determine the Pass/Fail
quality of the Injector coil.
