Skylark V6-3100 3.1L VIN M SFI (1996)
Fuel Pressure Sensor/Switch: Service and Repair
Fuel Tank Pressure Sensor
REMOVE OR DISCONNECT
1. Relieve the system fuel pressure.
2. Drain fuel tank.
3. Remove the fuel tank.
4. Remove the electrical connector from the fuel tank vapor pressure sensor.
5. Remove the fuel tank vapor pressure sensor (1) from modular fuel sender.
INSTALL OR CONNECT
1. Install the new fuel tank vapor pressure sensor (1) to modular fuel sender.
2. Install the electrical connector to fuel tank vapor pressure sensor
3. Install the fuel tank.
4. Refill tank.
5. Install the negative battery cable.