Skylark V6-3100 3.1L VIN M SFI (1996)
9.
Install expandable foam seal tape on rail under fender (see Figure 3).
10.
Heat foam seal tape with heat gun to expand.
11.
Re-tighten LH fender.
12.
Install LH headlamp support assembly and center grille.
13.
Install LH headlamp assembly.
14.
Install splash shield above LH headlamp assembly.
15.
Aim headlamp.
Parts Information
P/N
Description
22600316
Rubber Plug/Expandable Foam
Tape Kit
Parts are currently available from GMSPO.