Skylark V6-3100 3.1L VIN M SFI (1996)
Torque Converter Clutch Solenoid: Service and Repair
Torque Converter Clutch (TCC) Solenoid
TORQUE CONVERTER CLUTCH (TCC) SOLENOID
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Install engine support fixture, J 28467-A.
3. Raise vehicle and Support.
4. Case side cover. Refer to "Case Side Cover and Gaskets."
5. Clips retaining solenoid.
6. Solenoid Harness connector and solenoid.
INSTALL OR CONNECT
1. Solenoid Harness connector and solenoid.
2. Retaining Clips.
3. Case side cover, new gaskets and attaching bolts.
4. Lower vehicle.
5. Remove engine support fixture.
6. Negative battery cable.
ADJUST
^
Oil level.
