Skylark V6-3100 3.1L VIN M SFI (1996)
Hazard Warning Switch: All Technical Service Bulletins
Inspection Procedure
HAZARD WARNING LAMPS (FOUR-WAY FLASHERS)
1.
Activate hazard lamps by sliding hazard lamp switch (located on top of steering column) to the right. The turn-signal/hazard lamp interior telltales
should begin flashing.
2.
Get out of the vehicle and move to a position in front of the vehicle. Observe the front turn-signal/hazard lamps for correct function (flashing on
and off).
Move to the rear of the vehicle and observe the rear turn-signal/hazard lamps for correct function (flashing on and off).
If all front and rear turn-signal/hazard lamps are functioning correctly (flashing on and off), be sure to fill out the postage paid reply card enclosed with
this letter and check "service was done as requested on," date the card, sign card, and return it to (Chevrolet, Oldsmobile, Pontiac) Division. This will
allow us to remove your vehicle from further campaign follow-up communications.
If either the front or rear turn-signal/hazard lamps are not functioning correctly, please make an appointment with your dealer to have the campaign
service performed.
