Somerset Regal L4-151 2.5L (1985)
![background image](/buick/somerset_regal/l4-151_2.5l/Page-1135001.png)
Brake Master Cylinder: Service and Repair
Master Cylinder Installation
For additional informations see Notes, Warnings, and Hints. See: Fundamentals and Basics
Removing/Installing Master Cylinder Assembly
-
Install master cylinder and attaching nuts and torque to 30 - 45 Nm (22 - 30 ft. lb.).
-
Install pushrod to brake pedal (manual master cylinder).
Failure Warning Switch
-
Install electrical connector at warning switch.
-
Install hydraulic lines and tube nuts and torque to 14 - 20 Nm (120-180 in. lb.).
-
Fill master cylinder to proper level with clean brake fluid. Proper level is between min. and max. indicator levels in opening on top reservoir.
-
Bleed hydraulic system. See: Service and Repair
-
Recheck fluid level.