buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Technical Service Bulletins for Tachometer: > < Diagram Information and Instructions|Page 4528
Page 1
background image

Tachometer: Customer Interest
Digital Cluster - Engine Electrical Related Conditions

Bulletin  86-8-5A

Date      

May '86

Ref.No. 86-040A-8
SUBJECT:

DIGITAL CLUSTER ENGINE ELECTRICAL RELATED CONDITIONS

MODELS AFFECTED: 1985 SOMERSET, 1986 SKYLARK, AND 1986 SOMERSET WITH 2.5L ENGINE (VIN CODE U)

NOTE:

THIS BULLETIN SUPERSEDES BULLETIN 86-8-5, DATED JAN., '85. THE PART NUMBER IN ORIGINAL BULLETIN WAS
INCORRECT, PLEASE DISCARD ORIGINAL BULLETIN AND REPLACE IT WITH THIS ONE.

Some 2.5L equipped Buick "N" cars may exhibit digital cluster conditions that are engine electrical related. Before requesting an exchange cluster be
sure to check for the following conditions:

The tachometer filter, taped to the engine harness by the ignition coil, may become inoperative when the car is cold and then work normally 5 to 10
minutes after the engine is started. During the inoperative period the display can be affected in two ways:

1.

The speedometer "pegs" at 85 mph and flashes and the multi-function gauges may flash.

2.

The tachometer reads 3 to 4 times the actual ERPM value.

If either of these conditions occur, replace the tachometer filter (P/N 10035324).

The ignition coil may become inoperative. If the digital cluster segments flash in a random manner with the engine running and operates correctly with
the engine not running, replace the ignition coil (P/N 1115315).

Be sure to follow other diagnostic procedures outlined in the Chassis Service Manual before replacing the digital cluster.

All Technical Service Bulletins for Tachometer: > < Diagram Information and Instructions|Page 4528