Terraza AWD V6-3.5L VIN L (2006)
8. Lift the center roller bracket (3) upwards and remove the bracket from the center track.
Installation Procedure
1. Attach the cable ends.
Important: Ensure that the power sliding door cable barrels are properly installed into the sliding door center roller bracket cable
retaining items located on the roller bracket.
2. Position the sliding door center roller bracket to the front radius of the sliding door center track.
3. Lower the sliding door center roller bracket to sliding door center track down and into the sliding door center track.
4. Install the cable to the rear roller bracket.
5. Adjust cable tension. Refer to Cable Tension Adjustment - Sliding Door (See: Adjustments) .