Terraza FWD V6-3.5L VIN L (2006)
Sliding Door Latch: Service and Repair
Latch Replacement - Door
Removal Procedure
Important: By removing the power sliding door (PSD) 15A fuse, the low current logic power for both the LH and RH power sliding door
modules (PSDM) will be interrupted and both PSDs will be inoperative.
1. If equipped with a power sliding door, disable the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block.
2. Remove the sliding door inner trim panel. Refer to Trim Panel Replacement - Side Rear Door () .
3. Remove the sliding door water deflector. Refer to Water Deflector Replacement - Sliding Door () .
4. Remove the sliding door latch screws.
5. Remove the sliding door latch from the sliding door.
6. When the sliding door latch is loose, unhook the latch/lock rod form the sliding door latch.
Installation Procedure