Terraza FWD V6-3.5L VIN L (2006)
Power Door Lock Actuator: Procedures
Lock Actuator Replacement - Front Door
LOCK ACTUATOR REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the front door module.
2. Disconnect the front door lock actuator electrical connectors.
3. Remove the front door outside handle lock rod bracket.
4. Remove the front door lock actuator screws.
5. Remove the front door lock actuator from the front door lock.
INSTALLATION PROCEDURE
1. position the front door lock actuator to the front door lock.
2. Install the front door lock actuator screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).