Terraza FWD V6-3.5L VIN L (2006)
Brake Rotor/Disc: Specifications
Front Brakes
Rotor Thickness - NEW ..................................................................................................................................................................... 32.2 mm (1.27 inch)
Rotor Discard Thickness * ................................................................................................................................................................ 30.7 mm (1.21 inch)
Rotor Maximum Allowable Assembled Lateral Runout .................................................................................................................. 0.06 mm (0.002 inch)
Rotor Maximum Allowable Scoring ................................................................................................................................................ 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation .......................................................................................................................... 0.025 mm (0.001 inch)
Rotor Minimum Allowable Thickness After Refinish ..................................................................................................................... 31.08 mm (1.22 inch)
Rear Brakes
Rotor Thickness - NEW ................................................................................................................................................................... 12.0 mm (0.472 inch)
Rotor Discard Thickness * ............................................................................................................................................................... 10.5 mm (0.413 inch)
Rotor Maximum Allowable Assembled Lateral Runout .................................................................................................................. 0.06 mm (0.002 inch)
Rotor Maximum Allowable Scoring ................................................................................................................................................ 1.50 mm (0.059 inch)
Rotor Maximum Allowable Thickness Variation .......................................................................................................................... 0.025 mm (0.001 inch)
Rotor Minimum Allowable Thickness After Refinish ..................................................................................................................... 10.8 mm (0.425 inch)
*
All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor,
replace any rotor that does not meet the minimum thickness specifications.