Terraza FWD V6-3.5L VIN L (2006)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Oil Seal Replacement
^
Tools Required
-
J 35468 Cover Aligner and Seal Installer
Removal Procedure
1. Remove the crankshaft balancer.
2. Important: Do not damage the crankshaft.
Remove the crankshaft key from the keyway.
3. Pry out the oil seal using a large screwdriver or the equivalent.
4. Inspect the following items for scratches:
^
The front cover
^
The crankshaft
Installation Procedure
1. Lubricate the oil seal using clean engine oil.
2. Insert the oil seal into the front cover with the lip facing the engine. Use the J 35468.
3. Install the crankshaft key into the keyway.
4. Install the crankshaft balancer.