Terraza FWD V6-3.5L VIN L (2006)
Control Arm Bushing: Service and Repair
Front Suspension
Lower Control Arm Bushings Replacement
^
Tools Required
-
J 21474-01 Control Arm Bushing Set
-
J 34126 Sprocket Bearing Remover
-
J 35379 Front Knuckle Support
-
J 23444-A Extreme Pressure Lubricant-1/4 Ounce Tube
Removal Procedure
1. Remove the lower control arm.
2. Secure the lower control arm in a vice.
3. Mark the lower control arm along the flat edge of the bushing flange.
4. Important:
Apply J 23444-A, or equivalent high pressure lubricant, to the threads of the J 21474-27.
Assemble the following bushing removal tools as shown:
^
J 21474-27 1/2 Inch Puller Bolt Thrust Bearing
^
J 21474 Control Arm Bushing Installer
^
J 34126 Sprocket Bearing Remover
^
J 35379 Front Knuckle Support
^
J 21474-2 Bushing Installer Remover
^
J 21474-4 1/2 Inch Nut
5. Tighten the J 21474-4 until the bushing is removed from the control arm.
6. Disassemble the bushing removal tools.
Installation Procedure