Terraza FWD V6-3.5L VIN L (2006)
Wheel Bearing: Service and Repair
Front Suspension
Wheel Bearing/Hub Replacement - Front
^
Tools Required
-
J 28733-B Front Hub Spindle Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Disconnect the wheel speed sensor electrical connector (2).
4. Remove the wheel speed sensor electrical connector from the bracket.
5. Remove the brake caliper bracket with the brake caliper.
6. Remove the brake rotor.
7. Remove the wheel drive shaft nut.