Terraza FWD V6-3.5L VIN L (2006)
Liftgate Window Glass: Service and Repair
Window Replacement - Liftgate
Tools Required
*
J 24402-A Glass Sealant Cold Knife Remover
*
J 39032 Stationary Glass Removal Tool
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Caution: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces
and inner trim.
1. Open the liftgate.
2. Remove the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk
/ Liftgate Interior Trim Panel/Service and Repair) in Body Rear End.
3. Remove the rear wiper motor. Refer to Wiper Motor Replacement - Rear.
4. Disconnect the rear window defogger electrical connector (2).
Caution: If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.
5. Cover the following parts to protect from broken glass:
1. The rear stowage compartment
2. The defroster outlets and A/C outlets
3. The seats and carpeting