CTS Coupe AWD V6-3.6L (2011)
13. Disconnect the intermediate park brake cable (2) from the front park brake cable connector.
14. Remove the intermediate park brake cable from body bracket.
15. Position the frame support table J 39580 .
16. Remove the frame to body mounting bolts (4) and washers (3).
17. Carefully raise the vehicle from the rear frame assembly.
18. Remove the following components from the rear frame:
*
Headlamp Leveling Rear Suspension Height Sensor Replacement
*
Lower Control Arm Replacement
*
Upper Control Arm Replacement
*
The rear brake pipes
*
Parking Brake Rear Cable Replacement - Left Side or Parking Brake Rear Cable Replacement - Right Side
*
Stabilizer Shaft Replacement
*
Adjust Link Replacement
*
Trailing Arm Replacement
*
Stabilizer Shaft Link Replacement
*
Rear Brake Caliper Replacement
*
Rear Brake Rotor Replacement
*
Differential Replacement
19. With the aid from an assistant, remove the frame from the hydraulic jack.
Installation Procedure