DeVille V8-4.6L VIN Y (1998)
Emergency Contact Module: All Technical Service Bulletins
2003-2005 Saab 9-3 (9400) 4D/5D; 2004-2005 Saab 9-3 (9400) CV
2003-2005 Saab 9-3 (9440) 4D/5D; 2004-2005 Saab 9-3 (9440) CV
Notice:
Handle the fiber optic cables with care or the signal may be distorted.
^
It is very important that the two leads in the connector are not confused with one another.
^
Do not splice the cables.
^
Do not bend the cable in a radius smaller than 25 mm (1 in).
^
Do not expose the cable to temperatures exceeding 185°F (85°C).
^
Keep the cable ends free from dirt and grime.
^
Do not expose the cable to impact as this may cause the transparent plastic to whiten, thereby reducing the intensity of the light and causing
possible communication interruptions.
^
The cable should not lie against any sharp edges as this may cause increased signal attenuation.
1.
Remove the ECU CU with a Tech 2(R) according to the following: Fault diagnosis - Select model year - Select Saab 9-3 Sport (9440) - All -
Add/Remove - Control Module - CU/PU - Remove.
2.
Remove the ground cable from the battery's negative terminal.
3.
Remove the floor console in accordance with WIS - 8. Body - Interior equipment - Adjustment/Replacement.
4.
Pry out the signal line from the SRS control module to the OnStar(R) control module and secure it:
4.1.
Unplug the SRS control module's connector (A).