DeVille V8-4.6L VIN Y (1998)
Air Bag: Service and Repair
Passenger's Inflator Module
Removal
Description
1. Disable the frontal SIR system. Refer to Disabling the SIR System.
2. Remove the upper trim panel. Refer to Instrument Panel, Gauges, and Console.
3. Remove the inflatable restraint IP module fasteners (2).
4. Remove the inflatable restraint IP module (1).
Installation
Description
1. Install the inflatable restraint IP module (1).
NOTICE: Refer to Fastener Notice in Vehicle Damage Warnings.
2. Install the inflatable restraint IP module mounting fasteners.
Tighten
Tighten fasteners to 2 N.m (18 lb.in).
3. Install the IP upper trim pad.
4. Enable the frontal SIR system.
Important Preliminary Precautions
CAUTION: When you are carrying an undeployed inflator module:
^
Do not carry the inflator module by the wires or connector on the inflator module
^
Make sure the bag opening points away from you