Astro Van 2WD V6-4.3L VIN W (2001)
1. Remove the excess ends of the bolt(1) to be even with the door plate(2).
2. Install the hinge pin bushings.
3. Apply a medium-bodied sealer to the mating surface of the hinge halves.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the following components to the door and the body frame:
*
Anchor plates
*
Bolts (3)
Tighten the bolts to the door and the body frame to 27 Nm (20 lb.ft.).
*
Hinge halves
Align the hinge with the previously made mark.
5. Paint the hinge and the surrounding area.
6. Install the trim panel. Refer to Door Trim Panel Replacement (See: Front Door/Front Door Panel/Service and Repair).
7. Install the taillamp filler panel.
8. Install the taillamp. Refer to Tail Lamp Replacement .
9. Install the door to the vehicle. Refer to Rear Door Replacement (Cargo Doors) (See: Service and Repair/Rear Door Replacement (Cargo Door)