Astro Van 2WD V6-4.3L VIN W (2001)
1. Position the trim panel to the door.
2. Secure the trim panel retainers to the door by pressing into the door until fully seated.
3. Place the window seal portion of the panel over the door frame in order to install the trim panel to the door.
4. Install the door courtesy lamp to the door panel.
5. Connect the electrical connectors to the switches on the accessory switch mounting plate, as needed.
6. Install the plate to the trim panel.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the one screw at the front edge of the accessory switch mount plate.
Tighten
Tighten the one screw at the front edge of the accessory switch mount plate to 2 N.m (18 lb in).
8. Install the handle to the door with screws.
Tighten
Tighten the handle to the door with screws to 5 N.m (44 lb in).
9. Install the caps that cover the screws on the assist handle.
10. Insert the tab in the slot on the door trim panel and seat the fastener into the door at the top in order to install the upper corner trim.
11. Push the lock lever escutcheon into place starting at the rear edge.
