Astro Van 2WD V6-4.3L VIN W (2001)
Tighten
Tighten the three retaining screws to the upper garnish molding to 2 N.m (18 lb in).
Sliding Door
TRIM PANEL REPLACEMENT
TOOLS REQUIRED
J 38778 Door Trim Pad and Garnish Clip Remover
REMOVAL PROCEDURE
1. Remove the screws that retain the inside handle bezel (1) to the door.
2. Pull in order to disengage the clips (2).
3. Remove the inside handle bezel (1).
4. Remove the garnish molding.
5. Use J 38778 in order to release the trim panel retainers.
6. Remove the sliding door trim panel.
INSTALLATION PROCEDURE
1. Install the trim panel to the door:
1.1.
Align the retainers to the holes in the door.
1.2.
Press the panel in order to engage the retainers into the door.
