Astro Van 2WD V6-4.3L VIN W (2001)
1. Install the trim panel to the door:
1.1.
Align the retainers to the holes in the door.
1.2.
Press the panel in order to engage the retainers into the door.
2. Press in order to engage the clips and install the inside handle bezel.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screws (3) that retain the inside handle bezel (1).
Tighten
Tighten the screws that retain the inside handle bezel to 2 N.m (18 lb in).
4. Install the garnish molding.
Sliding Rear Side Door Trim Panel Replacement
Sliding Rear Side Door Trim Panel Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
